Gas Recovery and Recycle System
CO2 Transfer Pumps
Cylinder Vice
Dry Chemical Recovery / Recharge
Fire Hose Tester
Hydrostatic Test Systems & Cylinder Dryers
Page 1
| FM200 / HFC-227 Recovery/Recycle System |
Part # CF59274 
|
• Designed With The Operator In Mind
• 99% Transfer Efficiency
• Transfers Liquid, Vapor And Nitrogen
• Suitable for Novac 1230
• HFC-227 Liquid Transfer Rate Of 16 lbs Per Minute Maximum
• HFC-227 Vapor Transfer Rate Of 2 lbs Per Minute Maximum
• Filters Particulate Matter
• Indicates Moisture
• Operates On Compressed Air Pressure Between 100-120 PSI At A Minimum Of 13CFM
• Space Saving Design
• Includes (4) Adapters |
-------------------------------------------------------------------------------------------------
| Halotron1 Recovery System |
Part # CF59236 
|
• Environmentally Friendly
• Fills/Recovers Halotron 1 Liquid And
• Capable Of Reusing Original Argon To
• Particulate Matter Removal To 15 Microns
• Indicates And Removes Moisture To Below 99% Transfer Of Liquid, Vapor And Argon
• Filters Acid, Wax And Sludge
• Filters Out Discoloration
• Operates On 65-70 PSI Of Compressed Air
• Air Driven Double Acting Piston Pump
• Air Cooled Pump Barrell
• Stainless Steel Check Valves And Springs
• Stainless Steel Barrel Sleeve And Piston
• All Liquid Seals Compatible w/Halotron 1!
• 0-250 PSI Cylinder Discharge Pressure
• Average 16 lbs Per Minute Of Liquid Transfer
• Average 2 lbs Per Minute Of Vapor Transfer
• 0-300 PSI Inlet Pressure & 0-30 Vacuum Gauge
• 0-300 PSI Discharge Pressure Gauge
• Heavy Duty Tubular Frame
• Heavy Duty Console
• Powder Coated Paint Finish
Weight: 260 lbs |
-------------------------------------------------------------------------------------------------
| CO2 Transfer Pump |
Part # CF58593 
|
• Operates Efficiently On Compressed Air Or Nitrogen At Approximately 130PSI
• Fill 10 lb CO2's In Less Than 60 Seconds
• Single Action Pump
• 4-CO2 Adapters Included
• 14"L x 14"W x 11"H
• Weight: 39 lbs |
-------------------------------------------------------------------------------------------------
| Wall-Mount High/Low C02 Pump |
Part # CF59456 
|
• CO2 Microfill System
• Fills CO2 Extinguishers
• Fills CO2 Cylinders
• 4 Fill Adapters Included
• Complete with Pump and Hoses
• Includes Wall Mounting Bracket
• Variable Filling Rate From 1 To 15 lbs. Per Minute (Controlled By Gas Flow Rate Of 20 CFM )
• Maximum Outlet Pressure: 1750 psi
• Driven With Low-Pressure Dry Gas Of 100 PSI (Can Be Connected To Gas Use Off Liquid Source)
• Wide Liquid Carbon Dioxide Inlet Pressure Range Of 175 To 800 PSI To Match Typical Storage Systems
• Designed For Long Life And Minimal Maintenance
• Oil-Less Design Eiminates Product Contamination |
-------------------------------------------------------------------------------------------------
| Inverter Cylinder Air Powered |
Part # CF59424 
|
• Light Weight Square Tubular Construction
• Powder Coat Paint For Maximum Longevity
• Dual Air Toggle Switches Clamp And Invert The Cylinder
• Non-Marring Rubber Belt Secures The Cylinder To Frame
• Adjustable Cylinder Height And Clamping Brackets
• No Electrical Connections Required
• Low Cost Alternative To Expensive Automatic Inverters
• Space Saving Design Will Fit In Most Work Areas
• Water Blowout Tube Included
• Weight: 300 lbs |
-------------------------------------------------------------------------------------------------
| Floor Pneumatic Cylinder Vice |
Part # CF58634
|
• Base plate mounted
• Formed iron pedestal
• Powder coated paint
• Pneumatic-operated cylinder
• Non-slip durable belting eliminates scratching of cylinders
• Adjustable - fits 5 lb. to 100 lb. CO2 cylinders
• Vice opens and closes within seconds
• Includes tool and stamp tray
• Shipping Weight 145 lbs. |
-------------------------------------------------------------------------------------------------
| V2 150 PR - 2 x 150 LB Capacity Hopper |
Part # CF58605
|
• 2 - 150 lb. capacity hoppers
• 1 Double valve control console
• 2 Filling lines
• 1 Double hopper stand
• 2 Powder recovery lids
• 2 Discharge assemblies
• 2 Discharge screens
• Operates on 60-80 PSI, 1-2 CFM
• Shipping weight - 120 lbs. |
-------------------------------------------------------------------------------------------------
| Dust Collection System 60 HZ Single PHZ |
Part # CF53583 
|
• Portable Downdraft Table
• 2 Cartridge Filters
• One 99.97% External Hepa Filter
• 24" x 48" Steel Grate Work Surface
• 36" High Enclosure With Side, Back And Top
• Welded Steel Cabinet, Finisher With Epoxy Powder Coat Paint
• Easy Access Cover To Filters
• Removable 10 gal. External Dust Drawer
• One 40 Watt, 115 Volt, Work Light
• 73 dba Sound Level
• No External Make Up Air Required
• Self Contained
• 53"W x 29" D x 68" H
• Weight 525 lbs. (196kg)
• 3 Year Mfg. Warranty |
-------------------------------------------------------------------------------------------------
| Pump Single Hose Tester Electric |
Part # CF58590 
|
• 0-1000 Piston Pump
• 0-600 Liquid Filled Gauge
• 120 Volt Washdown-Totally Enclosed Electric Motor
• Class A Ground Fault Plug
• Designed To Meet NFPA Service |
-------------------------------------------------------------------------------------------------
| ir Powered Hydrostatic Test System with DIGITAL pressure gauge |
Part # CF59105 
|
• Air powered pump with DIGITAL pressure gauge
• Large 3½” digit display
• Getz head assembly
• Rotating safety cage
• Air blowout valve – for quick dispersal of water from extinguisher
• Filtration system – filters out dry chemical during empty cycle to eliminate contaminated water in your drain system
• Fill and empty lines include female quick coupling
• Garden hose water hook up
• Operates on 80-100 PSI, shop air, nitrogen or CO2 vapour
• Shipping weight 125 lbs. |
-------------------------------------------------------------------------------------------------
| Cylinder Dryer Hot Box |
Part # CF59332 
|
• New Concept For Drying Low Pressure Cylinders
• Quick Drying
• Quiet Running
• Heats Cylinders Inside And Out
• Regulated Heat Up To 150 Degrees
• Dries (8) Cylinders At Once
• Galvanized Steel Case
• Teflon Flooring
• (4) Swivel Casters
• Dimensions 34"W x 43"H x 26"D
• 60 Cycle 120 Volts - 15 AMP Circuit
• Weight: 375 lbs |
|
