Canada Fire Equipment Company - www.canadafire.com

Browse the online Catalog

Back to Catalog menu

Aerosol Cans
Brushes
Channellock Screwdrivers
CO2 Recharge Equipment
Fasteners
Flashlight
Funnels, Scoops and Air Hose
Gauge Service Equipment
Hand Cleaner
Hole Punch and Chain Reel
Holsters, Belts, Bags & Bins
Hydrotest Adaptors
Hydrotest Equipment

Page 2

Brooks Sign On Aerosol

Part # CFBA1

Brooks Sign On Aerosol Adhesive bonds signs to almost anything. Great for porous surfaces!

Extremely versatile, securely bonds vinyl and surface mounted aluminum signs to brick, cinder block, unpainted sheet rock plus othe porous surfaces.
• Temporary or Permanent Bonds
• Low soak in
• Colourless
• Non-clogging
• Waterproof
• Fast, aggressive tack development

-------------------------------------------------------------------------------------------------

Brooks Lube Aerosol

Part # CFBA2

BROOKS LUBE made for the fire extinguisher industry. Lubricates, cleans, penetrates and protects parts.

-------------------------------------------------------------------------------------------------

Brooks Krazy Kleen Aerosol

Part # CFBA4

BROOKS KRAZY KLEEN multi-purpose industrial strength cleaner. Use it in the shop, on the trucks and at home.

-------------------------------------------------------------------------------------------------

Brass Bristle Cleaning Brush for Aluminum

Part # CFBVCB

BRUSHES for cleaning valves, threads, etc.

-------------------------------------------------------------------------------------------------

Brass Cleaning Brush

Part # CFBWB

BRUSHES for cleaning valves, threads, etc.

-------------------------------------------------------------------------------------------------

Industrial Grade Wire Brush

Part # CFCWB

BRUSHES for cleaning valves, threads, etc

-------------------------------------------------------------------------------------------------

Metal Bristle Cleaning Brush

Part # CFVCB

BRUSHES for cleaning valves, threads, etc.

-------------------------------------------------------------------------------------------------

Nylon Bristle Cleaning Brush

Part # CFNB

BRUSHES for cleaning valves, threads, etc.

-------------------------------------------------------------------------------------------------

Nylon Cleaning Brush

Part # CFNWB

BRUSHES for cleaning valves, threads, etc.

-------------------------------------------------------------------------------------------------

Nylon Wire Brush

Part # CFWB

BRUSHES for cleaning valves, threads, etc.

-------------------------------------------------------------------------------------------------

Tooth Brush

Part # CFTB

BRUSHES for cleaning valves, threads, etc.

-------------------------------------------------------------------------------------------------

Hold-E-Zee® Phillips #2 x 6¾" Blade Screwdriver

Part # CFTLP27

SCREWDRIVERS by CHANNELLOCK®. Features black chrome vanadium steel construction with cushion grip over rugged injection molded handles.

-------------------------------------------------------------------------------------------------

Phillips #2 x 4" Blade Screwdriver

Part # CFTL24

SCREWDRIVERS by CHANNELLOCK®. Features black chrome vanadium steel construction with cushion grip over rugged injection molded handles.

-------------------------------------------------------------------------------------------------

Standard 1/4" x 4" Blade Screwdriver

Part # CFTL74

SCREWDRIVERS by CHANNELLOCK®. Features black chrome vanadium steel construction with cushion grip over rugged injection molded handles.

-------------------------------------------------------------------------------------------------

Standard 3/16" x 6" Blade Screwdriver

Part # CFTL56

SCREWDRIVERS by CHANNELLOCK®. Features black chrome vanadium steel construction with cushion grip over rugged injection molded handles.

-------------------------------------------------------------------------------------------------

1/2" F Plastic Hand Nut

Part # CFCO12

-------------------------------------------------------------------------------------------------

1/4" F x 1/2" M CO2 Charging Adapter

Part # CFCA225

-------------------------------------------------------------------------------------------------

6’ Charging Hose 1/4" M x 1/4" M

Part # CFCO3

Hose only from picture.

-------------------------------------------------------------------------------------------------

Paintball CO2 Recharge Adapter

Part # CFPBRA

PAINTBALL RECHARGE ADAPTER for making your own recharge set-up.The increasing popularity of Paintball has created a demand for the recharging of paintball gun carbon dioxide cartridges.

-------------------------------------------------------------------------------------------------

Valve Handle Grip

Part # CFVHG

VALVE HANDLE GRIP for holding squeeze handle type valves in the open position.

-------------------------------------------------------------------------------------------------

Fire Extinguisher, Cylinder Valving and Pipe Thread Sealing Compound

Part # CFMC2

MASTER METALLIC COMPOUND For use on metal or plastic pipe. MMC prevents leaks, withstands pressure well above 6,000 PSI and temperatures up to 700°F. Its seals against leakage of air, water, steam, gasoline and oils, natural or manufactured gases and almost all chemicals.

ULC listed for Natural Gas

• 2LB Can

Connections at the maximum pressures for the following mediums only:
Natural Gas - 6900 kPa (1000 PSI)
Gasoline Petroleum Oils - 6900 kPa (1000 PSI)
Propane, Butane - 6900 kPa (1000 PSI)

-------------------------------------------------------------------------------------------------

E-Z Toggle complete with screws

Part # CFEZTOG

E-Z TOGGLE self drilling toggle bolt requires no predrilling. Installs easily using a Phillips screwdriver, no other tools needed. Doesn’t leave those big gaping holes when removed. Unique patented clamp replaces both " and " winged toggles. Deep thread engagement for strength in " to "
wallboard (sheeetrock).

• Sold in Pkg. of 50

-------------------------------------------------------------------------------------------------

Metal E-Z Ancor complete with screws

Part # CFEZP

E-Z ANCHOR self drilling fastener requires no predrilling. Installs easily using a Phillips screwdriver, no other tools needed. Doesn’t leave those big gaping holes when removed. Deep thread engagement for strength in " to " wallboard (sheeetrock).

• Sold in Pkg. of 100

-------------------------------------------------------------------------------------------------

Condrive 1000 Installation Tool

Part # CFCAT

TAPCON SELF TAPPING CONCRETE ANCHORS are the fastest way to secure wall brackets and cabinets to concrete. Just drill pilot hole and screw it in! No plastic or metal plugs needed, cuts its own threads into masonry. Holds strong in block, brick or poured concrete. Use the Condrive tool for easy installation.

-------------------------------------------------------------------------------------------------

Tapcon Self-Tapping Anchors

Part #CF TAPCON

-------------------------------------------------------------------------------------------------

Teflon Tape (½" x 480")

Part # CFT480

-------------------------------------------------------------------------------------------------

Topspot®2 - 6½" x 2½" (L x DIA)

Part # CFS30000

TOPSPOT® 2 converts instantly from flashlights to headlamps.

Topspot® 2 features:
• 45° head tilt
• Spot-to-flood focus
• 2.2 watt krypton bulb, with back-up bulb
• Topspot® 2: 4½ or 7 hours (depending on bulb used)
• Features tough thermoplastic construction

Topspot® 2 uses 4-AA alkaline batteries (not included).

-------------------------------------------------------------------------------------------------

WOW™ - 5" x 2½" (L x DIA)

Part # CFS12500

WOW™ converts instantly from flashlight to headlamp. WOW™features, 180° head tilt, with textured reflector, eliminating, "hot spots" and 1.3 watt, krypton bulb. WOW™uses 2-AA (not included). Maxiumum run times:WOW™– 3½ hours. Features tough thermoplastic construction.

-------------------------------------------------------------------------------------------------

12’ Coiled Air Hose

Part # CFCH12

COILED HOSE rated at 200 PSI working pressure. Male ¼" NPT brass fittings.
NOTE: Do not use for recharge line.

-------------------------------------------------------------------------------------------------

25’ Coiled Air Hose

Part # CFCH25

COILED HOSE rated at 200 PSI working pressure. Male ¼" NPT brass fittings.
NOTE: Do not use for recharge line.

-------------------------------------------------------------------------------------------------

Large Funnel

Part # CFFF2

FILLING FUNNELS made of durable galvanized steel with two different heavy duty mesh screens properly sized and spaced. These screens eliminate clogging and jamming of the funnel allowing the chemical to flow through in a liquid state.

• 13"H x 10" Dia. x 1 1/8" O.D. Tip

-------------------------------------------------------------------------------------------------

Large Neck Funnel

Part # CFFF3

-------------------------------------------------------------------------------------------------

Small Funnel

Part # CFFF1

-------------------------------------------------------------------------------------------------

Large Metal Scoop

Part # CFSS2

METAL FILLING SCOOPS for filling dry chemical fire extinguishers.

-------------------------------------------------------------------------------------------------

Small Metal Scoop

Part # CFSS1

METAL FILLING SCOOPS for filling dry chemical fire extinguishers.

-------------------------------------------------------------------------------------------------

Pail Opener

Part # CFPLO

Aluminum PAIL OPENER for opening dry chemical pails quick and easy. Does not ruin lid.

-------------------------------------------------------------------------------------------------

Teflon Tape (½" x 480")

Part # CFT480

-------------------------------------------------------------------------------

Gauge Wrench

Part # CFGWRENCH

GAUGE WRENCH made of steel and fits most gauges.

-------------------------------------------------------------------------------------------------

Gauge Port Drill Set

Part # CFGPDS

GAUGE PORT DRILL BITS are great for removing powder from gauge ports.
NOTE: Set includes two bits that fit gauges, others for other uses.

-------------------------------------------------------------------------------------------------

Gauge Tester for Pressurized Water Extinguisher

Part # CFPWGT

Pressurized water extinguisher GAUGE TESTER allows you to check gauge while unit is pressurized. Can also be used as a tire gauge. Rugged bronze bourdon tube and brass movement. Holds pressure until released. Complete with operating instructions

-------------------------------------------------------------------------------------------------

8 oz. Squirt ‘n Bubbles Leak Detector

Part #CFLD1

BUBBLES LEAK DETECTOR adheres to overhead surfaces and leaves no residue, dries clean and clear. Best way to check for gauge leaks! Patented self storing "Squirtubes" have small bores for dispensing small quantities. OK for CO2 nitrogen and halon. Meets MIL-L-25567BC specification.

-------------------------------------------------------------------------------------------------

1 Gal.Orange Pumice Hand Cleaner

Part # CFG0955

Handcare cleaner is specifically formulated to gently remove a variety of soils and effectively cleanse hands. Hand cleaner is dermatologist-tsted.

-------------------------------------------------------------------------------------------------

Industrial Hole Punch - HEAVY DUTY

Part # CFHP3

• Has up to a 2" reach and clipping receptacle
• Punches a ?" round hole
• Used to punch more than one tag at a time
• Ideal for metal tags

-------------------------------------------------------------------------------------------------

Light Duty Hole Punch

Part # CFHP1

Hole Punch with Clipping Receptacle. Punches a 1/8" round hole.

-------------------------------------------------------------------------------------------------

Standard Duty Hole Punch

Part # CFHP2

Hole Punch with Clipping Receptacle. Punches a 1/8" round hole.

-------------------------------------------------------------------------------------------------

Chain Reel

Part # CFCR

Drill hole in handle of hole punch and attach to CHAIN REEL for safe keeping. Also great to keep track of your keys and/or system service pins.

-------------------------------------------------------------------------------------------------

Tool Mate 24 Pocket Carrier

Part # CFJB24

BUCKET TOOL MATE turns an empty bucket into a tool/supply carrier. Features 24 pleated pockets (17 outside-7 inside) leaving the center for larger bulky items like extension cords, drills, etc. Saves time by having all of your tools and supplies visible and within reach.

-------------------------------------------------------------------------------------------------

Tool Belt

Part #CFBELT1

The lightweight TOOL BELT combines all features of expensive tool belts into one economical package. Engineered by professional tool users to hold the most widely used repair tools, this belt performs just like belts that cost two to three times more. Perfect for the extinguisher service person. No more loading your pockets with tags, punches, seals, rubber mallet, etc. Fully adjustable belt with quick release buckle. One size fits most! Tools not included.

-------------------------------------------------------------------------------------------------

Large Parts Bin Box

Part # CFLBOX

PARTS BIN BOX. Great for storing o-rings, rivets, fusible links, etc.

-------------------------------------------------------------------------------------------------

Badger 10 - 20 lbs. Large Valve Extinguishers

Part # B9860

Badger Extinguisher 5 lb.

Part # B12290

Badger Extinguishers

Part # HTAA1

Badger Older Models with 2 5/8" Neck c/w OR229

Part # HTAB1

Badger Pressure Water Extinguishers c/w CEHG

Part # HTAA2

All General older small valve

Part # HTABU1

General Extinguishers, P.W. WS 800B, LS800 B Models with 2 11/16" Neck c/w OR145

Part # HTAG2

Pyrene Dry Chemical 5 - 10 - 20 lb.

Part # HTAP2

-------------------------------------------------------------------------------------------------

Adapter to use HTA’s with Getz Hydrostatic Test Equipment

Part # CF51041

-------------------------------------------------------------------------------------------------

Adapter to use HTA’s with Getz Hydrostatic Test Equipment

Part # CF51041

-------------------------------------------------------------------------------------------------

1/4" Connector to fit HTA Adapter

Part # CFCON1

Fits all HTA adpaters EXCEPT HTA41

-------------------------------------------------------------------------------------------------

Ansul Wrench for Cartridge Receiver D & E Models

Part # CFCRW1

-------------------------------------------------------------------------------------------------

Hydrotest Adapter for CEH75.

Part # CFA5720

-------------------------------------------------------------------------------------------------

Quick Disconnect Coupler

Part # CFQDC

-------------------------------------------------------------------------------------------------

1 1/4" UNF, Aluminum Cylinders & Extinguisher

Part # CPHPTA37

High pressure HYDROTEST ADAPTERS to be used in water jacket high pressure test units.

-------------------------------------------------------------------------------------------------

1/2" Straight Pipe, MSA & Others

Part # CFHPTA36

High pressure HYDROTEST ADAPTERS to be used in water jacket high pressure test units.

-------------------------------------------------------------------------------------------------

3/4" UNF, Scott Air Cylinders-II & Aluminum ICC 2015, Sportsway Dive Tanks & Others w/o O-Ring Groov

Part # HPTA28

High pressure HYDROTEST ADAPTERS to be used in water jacket high pressure test units.

-------------------------------------------------------------------------------------------------

Left-Hand Thread High Pressure Test Adapter for Ansul & General Cartridges, Flag & Pyrene

Part # CFHTAN1

High pressure hydrostatic CARTRIDGE TEST ADAPTERS. For cartridges with a diameter of 2" & over.

1000 PSI Replacement Gauge for Hydrostatic Test Pump

Part # CFHTG

LOW PRESSURE HYDROTEST PUMP made of cast aluminum. Comes with stainless steel pistons and a pressure gauge with a rating of 0-1000 PSI. Shipping weight is 12 lbs.

-------------------------------------------------------------------------------------------------

10’ High Pressure Hose

Part # NH10

LOW PRESSURE HYDROTEST PUMP made of cast aluminum. Comes with stainless steel pistons and a pressure gauge with a rating of 0-1000 PSI. Shipping weight is 12 lbs.

-------------------------------------------------------------------------------------------------

Hydrotest Pump Complete As Shown

Part # CFHTP1000

LOW PRESSURE HYDROTEST PUMP made of cast aluminum. Comes with stainless steel pistons and a pressure gauge with a rating of 0-1000 PSI. Shipping weight is 12 lbs.

-------------------------------------------------------------------------------------------------

Quick Disconnect Coupler

Part # CFQDC

LOW PRESSURE HYDROTEST PUMP made of cast aluminum. Comes with stainless steel pistons and a pressure gauge with a rating of 0-1000 PSI. Shipping weight is 12 lbs.

-------------------------------------------------------------------------------------------------

Replacement Check Stem Kit for HTP1000

Part # CFHTPVS

LOW PRESSURE HYDROTEST PUMP made of cast aluminum. Comes with stainless steel pistons and a pressure gauge with a rating of 0-1000 PSI. Shipping weight is 12 lbs.

-------------------------------------------------------------------------------------------------

Test Cage

Part # CFHTC

TEST CAGE manufactured to NFPA 10 specifications. Durable red powder paint finish, 13 gauge steel mesh with 11 gauge steel
frame & mounting holes on the bottom. The top of the cage has a 1½" hole for the test hose and the door is on hinges with a latch for easy access. Shipping weight is 29 lbs. Measures 12½" x 12½" x 31½"

-------------------------------------------------------------------------------------------------

16" Cylinder Inspection Light - Standard Lamp

Part # CF16CIL

CYLINDER INSPECTION LIGHTS. These lights are great for inspecting the inside of cylinders. Both come with a protective cover that can be used as an extension, flexible shaft that can be bent to desired angle. Batteries included. The Krypton bulb will fit in either light.

-------------------------------------------------------------------------------------------------

24" Cylinder Inspection Light - Krypton Lamp

Part # CF24CIL

-------------------------------------------------------------------------------------------------

Cylinder Inspection Light w/ 12" Cable

Part # CFCLITE

-------------------------------------------------------------------------------------------------

Krypton Replacement Bulb

Part # CF110KRP

-------------------------------------------------------------------------------------------------

Replacement Bulb for NCLITE - Old Style

Part # CF1767

-------------------------------------------------------------------------------------------------

Replacement Bulb for NEW NCLITE (2004)

Part # CF245

-------------------------------------------------------------------------------------------------

Standard Replacement Bulb

Part # CF100STD